LCR MT4080A

100Hz/120Hz/1KHz/10KHz/100KHz

LCR MT4080A 图片概况:

LCR MT4080A 功能介绍:

1. Measurement parameters : Z, L, C, DCR, ESR, D, Q, and q
2. Test conditions : 100Hz, 120Hz, 1KHz, 10KHz, 100KHz(MT4080a only), 1Vrms, 0.25Vrms, 0.05Vrms
3. 0.2% basic accuracy
4. Dual LCD display
5. Very quickly response
6. Fully auto/manual selection
7. DC resistance measurement
8. Rechargeable battery/ AC powered
9. User friendly
10. Infrared Interface ( RS 232C)

D Accuracy
D accuracy De is given as

Accuracy applies when Dx (measured D value) < 0.1
When DX > 0.1, multiply De by (1+Dx)

Q Accerarcy
Q accuracy is given as

Where, Qx is the measure Q value, De is the relative D accuracy
Accuracy applies when Qx · De < 1

q Accerarcy
q accuracy q is given as

Measuring Speed
Fast : 4.5 meas. /sec
Slow : 2.5 meas. /sec

General:
Temperature : 0°C to 40°C (Operating), 20°C to 70°C (Storage)
Relative Humidity : Up to 85%
Battery Type : NiMh or Alkaline (2AA size)
Battery Charge : Constant current 150 mA approximately
Battery Operation Life : 2.5 Hours typical
AC Operation : 110V/220V AC, 60/50Hz with proper Adapter
Low Power Warning : under 2.2V
Dimensions : 6.9" x 3.4" x 1.9" (LxWxH) (174mm x 86mm x 48mm) Weight : 470g

Order Information
MT4080A
100Hz to 100KHz Handheld LCR Merter
Standard Accessories
Shorting bar
DC 6V power adapter
AA-Size Ni-Mh rechargeable battery

Optional Test Fixtures/Accessories
TL08A SMD test probe
TL08B 4-wire test chips
TL08C 4-wire Kelvin chips
Carry case
RS232 To Infrared Adapter

频率	100Hz, 120Hz, 1KHz, 10KHz, 100KHz(MT4080A only)
精度	0.4%(MT4080A)
测试电平	1Vrms, 0.25Vrms, 0.05Vrms, 1Vdc(for DCR)
输出阻抗	100Ω ±5%
显示范围
Z	0.001Ω To 9999MΩ
L	0.001µH To 9999H
C	0.001PF To 9999F
DCR	0.000Ω To 9999MΩ
ESR	0.000Ω To 9999Ω
D	0.000 To 9999
Q	0.000 To 9999
q	-180.0 To 180.0
连接方式	lrDA
传送信号	Tx及Rx
流程控制	XON/XOFF
温度	0℃-40℃(操作时) -20℃-70℃(储存时)
相对湿度	0-85%
测量速度	快速 4.5次/秒慢速 2.5次/秒

电池寿命

2.5小时

长度	48mm
宽度	174mm
高度	86mm
重量	470g

LCR MT4080A其它规格参数

产品产地： 台湾

发布时间： 2007-1-22

产品类别： 电桥LCR

价格说明： 价优